Yumshoq po'lat uchun CVD ikki qoplamali CCMT09T308-HM karbidli burilish qo'shimchalari

To prevent insert waste and easily detect wear, the gold-colored TiN outer layer of the Dragonskin multilayer CVD Ti(C,N)/Al2O3/TiN coating from cutting tool. It not only enables users to clearly identify insert wear and index before a breakage, but also prevents sharp cutting edges from going unused and the insert being inadvertently discarded.

ISO-P po'latlari qisman ishlov berishda eng katta materiallar guruhidir va egiluvchan, past uglerodli po'latlardan yuqori qotishma po'lat navlarigacha bo'lgan materiallarni o'z ichiga oladi. Bunga tornalash jarayonida qattiqlik, qo'llash turlari va ishlov berish sharoitlaridagi o'zgarishlar qo'shiladi. Tegishli indekslanadigan qo'shimcha navini tanlashni osonlashtirish uchun.

The cutting characteristics of most turning applications are similar. For a given surface only one cutting tool is used. This tool must overhang its holder to some extent to enable the holder to clear the rotating workpiece. Once the cut starts, the tool and the workpiece are usually in contact until the surface is completely generated. During this time the cutting speed and cut dimensions will be constant when a cylindrical surface is being turned. In the case of facing operations the cutting speed is proportional to the work diameter, the speed decreasing as the center of the piece is approached. Sometimes a spindle speed changing mechanism is provided to increase the rotating speed of the workpiece as the tool moves to the center of the part.